HBS Beton product range
All concrete products
Every concrete element we produce for infrastructure and landscaping projects. Pick a category or browse by size.
78 products
Concrete Pipes
Ø200 Concrete Pipe
Our smallest diameter: perimeter and garden drainage, downpipe connections and short branch runs.
Concrete Pipes
Ø300 Concrete Pipe
The in-between size, used for drainage inside housing estates, plot connections and stormwater runs.
Concrete Pipes
Ø400 Concrete Pipe
For neighbourhood sewer runs, roadside water crossings and estate infrastructure.
Concrete Pipes
Ø500 Concrete Pipe
For stormwater collection lines and medium-sized sewer collectors.
Concrete Pipes
Ø600 Concrete Pipe
For trunk collectors, crossings under roads and stream-training work.
Concrete Pipes
Ø800 Concrete Pipe
For main sewer and stormwater collectors, culvert crossings and industrial infrastructure.
Concrete Pipes
Ø1000 Concrete Pipe
A large diameter for trunk runs and culvert crossings, on the same socketed joint.
Concrete Pipes
Ø1200 Concrete Pipe
The largest socketed concrete pipe we make: trunk collectors and stream-training runs.
Gasketed Concrete Pipes
Ø200 Gasketed Concrete Pipe
The same size with the gasket seated in the socket at the factory, for plot connections that have to stay sealed.
Gasketed Concrete Pipes
Ø300 Gasketed Concrete Pipe
The gasketed version for foul water inside estates; the joint needs no separate ring fitted on site.
Gasketed Concrete Pipes
Ø400 Gasketed Concrete Pipe
For neighbourhood sewers where the line must be watertight; the gasket is built into the socket.
Gasketed Concrete Pipes
Ø500 Gasketed Concrete Pipe
The gasketed version for medium collectors carrying foul water: every joint closes on a factory seal.
Gasketed Concrete Pipes
Ø600 Gasketed Concrete Pipe
An integrated gasket on the trunk size, against groundwater ingress and leakage out.
Gasketed Concrete Pipes
Ø800 Gasketed Concrete Pipe
The same diameter for foul water: joints stay sealed on deeply buried runs.
Gasketed Concrete Pipes
Ø1000 Gasketed Concrete Pipe
Large-section runs gasketed; the joints need nothing fitted on site.
Gasketed Concrete Pipes
Ø1200 Gasketed Concrete Pipe
The largest diameter gasketed, for a sealed joint on high-flow runs.
Reinforced Concrete Pipes
Ø800 Reinforced Concrete Pipe
The smallest diameter we make reinforced: the same section with a cage in it, for runs under load.
Reinforced Concrete Pipes
Ø1000 Reinforced Concrete Pipe
A large diameter, made reinforced, for trunk collectors, stream training and culvert crossings.
Reinforced Concrete Pipes
Ø1200 Reinforced Concrete Pipe
Our largest reinforced diameter: trunk collectors, large culverts and stream-training runs.
Gasketed Reinforced Concrete Pipes
Ø800 Gasketed Reinforced Concrete Pipe
The reinforced section gasketed, for loaded runs that also have to stay watertight.
Gasketed Reinforced Concrete Pipes
Ø1000 Gasketed Reinforced Concrete Pipe
Reinforced and gasketed, for large foul-water collectors; the joints need nothing fitted on site.
Gasketed Reinforced Concrete Pipes
Ø1200 Gasketed Reinforced Concrete Pipe
The largest reinforced diameter gasketed, for a sealed joint on high-flow collectors.
Slope Stones, Channels & Retaining Blocks
Slope Stone & Channel
For road embankments, canal walls and drainage lines, and for water discharge and irrigation runs.
Slope Stones, Channels & Retaining Blocks
Retaining Wall Block
A modular block for slope protection, terracing and retaining walls, with drainage gaps built in.
Parcel Chamber Body
Ø700 Parcel Chamber Body 20 cm
The shortest Ø700 body, for shallow chambers and for making up the last of the depth.
Parcel Chamber Body
Ø700 Parcel Chamber Body 30 cm
Mid height on Ø700: a few stacked together bring the chamber to the level of the line.
Parcel Chamber Body
Ø700 Parcel Chamber Body 40 cm
40 cm of Ø700 in one piece — fewer joints and a quicker install.
Parcel Chamber Body
Ø800 Parcel Chamber Body 25 cm
The in-between height on Ø800, for making up the depth of a parcel chamber.
Parcel Chamber Body
Ø800 Parcel Chamber Body 50 cm
Half a metre of Ø800 body in a single piece.
Parcel Chamber Body
80×80 Parcel Chamber Body 25 cm
A square section, for tight plot connections where a round body will not fit.
Parcel Chamber Body
80×80 Parcel Chamber Body 50 cm
The taller square body: 50 cm of level in a single piece.
Parcel Chamber Base
Ø700 Parcel Chamber Base — Ø200 Inlet/Outlet
For Ø200 runs on house and garden connections; the floor the chamber stands on comes cast in.
Parcel Chamber Base
Ø800 Parcel Chamber Base — Ø200 Inlet/Outlet
The same Ø200 inlet on a wider body, for chambers that need room to work inside.
Parcel Chamber Base
Ø800 Parcel Chamber Base — Ø300 Inlet/Outlet
For parcel chambers taking Ø300 runs; the openings are left in the mould.
Inspection Chamber Body
Ø1000 Inspection Chamber Body 35 cm
The shortest body, used under a cone or cover to make up the chamber's level.
Inspection Chamber Body
Ø1000 Inspection Chamber Body 50 cm
The in-between height — fewer pieces and fewer joints on a deep chamber.
Inspection Chamber Body
Ø1000 Inspection Chamber Body 60 cm
60 cm in one piece, for deep inspection chambers with the fewest joints.
Gasketed Inspection Chamber Body
Ø1000 Gasketed Inspection Chamber Body 35 cm
The shortest body for making up the chamber's level, arriving with its gasket already fitted.
Gasketed Inspection Chamber Body
Ø1000 Gasketed Inspection Chamber Body 50 cm
The in-between height — fewer pieces, and fewer joints to keep watertight.
Gasketed Inspection Chamber Body
Ø1000 Gasketed Inspection Chamber Body 60 cm
60 cm in one piece: the fewest joints, and so the fewest gasket lines.
Inspection Chamber Base
Ø1000 Inspection Chamber Base — Ø200 Inlet/Outlet
For chambers on Ø200 runs; the floor the chamber stands on comes cast in.
Inspection Chamber Base
Ø1000 Inspection Chamber Base — Ø300 Inlet/Outlet
The same body for Ø300 runs, with the openings formed in the mould.
Inspection Chamber Base
Ø1000 Inspection Chamber Base — Ø400 Inlet/Outlet
For chambers where Ø400 collectors connect.
Inspection Chamber Base
Ø1000 Inspection Chamber Base — Ø500 Inlet/Outlet
The step up to a main run: the same Ø1000 body, with the opening formed to take a Ø500 pipe.
Inspection Chamber Base
Ø1000 Inspection Chamber Base — Ø600 Inlet/Outlet
The largest opening: for chambers on Ø600 collectors and trunk runs.
Gasketed Inspection Chamber Base
Ø1000 Gasketed Inspection Chamber Base — Ø200 Inlet/Outlet
For Ø200 runs: the pipe enters a gasketed socket, and the floor comes cast in.
Gasketed Inspection Chamber Base
Ø1000 Gasketed Inspection Chamber Base — Ø300 Inlet/Outlet
The same body for Ø300 runs, with the gasket already seated in the opening.
Gasketed Inspection Chamber Base
Ø1000 Gasketed Inspection Chamber Base — Ø400 Inlet/Outlet
A gasketed opening for Ø400 collector connections.
Gasketed Inspection Chamber Base
Ø1000 Gasketed Inspection Chamber Base — Ø500 Inlet/Outlet
The step up to a main run, gasketed at the opening and at the collar.
Gasketed Inspection Chamber Base
Ø1000 Gasketed Inspection Chamber Base — Ø600 Inlet/Outlet
The largest opening: a gasketed base for Ø600 collectors and trunk runs.
Chamber Cone
Ø800 Chamber Cone 30 cm
The short transition on a parcel chamber: from body to Ø625 in 30 cm.
Chamber Cone
Ø1000 Chamber Cone 50 cm
The mid height for DN1000 inspection chambers: narrows to the Ø625 cover opening in 50 cm.
Chamber Cone
Ø1000 Chamber Cone 70 cm
70 cm of cone in one piece for a DN1000 inspection chamber.
Gasketed Inspection Chamber Cone
Ø1000 Gasketed Inspection Chamber Cone 50 cm
The mid height: down to the Ø625 cover opening in 50 cm, gasket already fitted.
Gasketed Inspection Chamber Cone
Ø1000 Gasketed Inspection Chamber Cone 70 cm
70 cm of cone in one piece: the fewest joints, and so the fewest gasket lines.
Cone Adjusting Ring
Ø625 Cone Adjusting Ring 5 cm
For the last few centimetres, the ones a fresh asphalt course leaves behind.
Cone Adjusting Ring
Ø625 Cone Adjusting Ring 10 cm
The standard adjusting height; paired with the 5 cm one for the levels in between.
Chamber Cover Slab
Ø700 Chamber Cover Slab
Closes a Ø700 parcel chamber; Ø900 slab.
Chamber Cover Slab
Ø800 Chamber Cover Slab
For Ø800 chambers; Ø1000 slab.
Chamber Cover Slab
Ø1000 Chamber Cover Slab
For DN1000 inspection chambers; Ø1200 slab.
Rainwater Gully Base
45×65 Rainwater Gully Base 50 cm
The most common size for pavement, garden and car park drainage; 65×85 cm outer body.
Rainwater Gully Base
65×80 Rainwater Gully Base 50 cm
The larger size for high-flow road and square drainage; 85×100 cm outer body.
Pumice Cable Stone
Cable Stone – Guide Plate 40×20×5 SBP-5
40×20 cm face, 5 cm thick; covers the cable run in one continuous row.
Pumice Cable Stone
Cable Stone – Guide Brick 14×7×7 SBP-7
14×7×7 cm brick; set between cables and in narrow service-connection trenches.
Kerb Stone
Road Kerb 70 cm
The standard size for pavement and median edges; 15×30 section, 70 cm long, 80 kg.
Kerb Stone
Garden Kerb
A lighter size for garden paths and lawn edges; 10×20 section, 50 cm long.
Kerb Stone
Mini Kerb
The smallest size, for narrow crossings and landscape edges; 9/12×20 tapered section.
Channel Stone
20×20 Channel Stone
20 cm wide; narrow edges, garden paths and light flows.
Channel Stone
20×30 Channel Stone
30 cm wide; the greater flow of estate roads and car park edges.
Channel Stone
20×40 Channel Stone
40 cm wide; the highest flow — main collection runs and square edges.
Paving Stone
Interlocking Paver
36 pieces per m². The keyed profile spreads the load into its neighbours; the standard where vehicles run.
Paving Stone
Begonit Cobble Paver
A cobble with a tumbled face and rippled sides for an aged look; the waves nest into the neighbouring stones and lock the surface. In grey, red, black and yellow.
Paving Stone
30×60 Paving Stone
5.6 pieces per m². A large format with few joints, for a calm, modern surface.
Paving Stone
30×30 Square Paver
11 pieces per m². The most common square size for pavements and courtyards.
Paving Stone
20×20 Square Paver
25 pieces per m². Little cutting waste in tight areas, and quick to lay.
Paving Stone
10×20 Prism Paver
50 pieces per m². The classic stone for herringbone and block patterns.
Paving Stone
10×10 Cube Paver
100 pieces per m². A cube paver, for curved paths and kerb transitions.
Grass Paver
40×60 Grass Paver
25 kg a piece, 4.2 to the square metre. One pallet covers about 10 m².
Contact
Let's talk about your next project.
Send your specification or quantity table; our team will respond shortly.